DealMemo icon DealMemo

Fix & Flip Hard Money Loan Cost Calculator

A flip budget that stops at purchase and rehab misses origination points, interest-only carry, an extension fee, and flat lender fees. This sheet prices that financing from example inputs you can replace. It does not quote a market rate. Interest is shown two ways for the same months: on the full commitment (purchase loan plus rehab holdback), and on a drawn balance (purchase loan plus the share of the holdback you enter). Points and the extension fee apply to the full commitment. Profit after financing subtracts total financing cost from the profit-before-financing amount you enter.

Hard Money Financing Cost
Commitment = Purchase loan + Rehab holdback. Points = Commitment x Points %. Extension fee = Commitment x Extension fee %. Interest months = Hold months + Extension months. Full-loan interest = Commitment x Annual rate x Interest months / 12. Drawn balance = Purchase loan + Rehab holdback x Average share outstanding. Drawn interest = Drawn balance x Annual rate x Interest months / 12. Total financing cost = Points + Interest + Extension fee + Lender fees. Cost as % of loan = Total financing cost / Commitment. Profit after financing = Profit before financing - Total financing cost.

Hard Money Cost from Example Inputs

Every number here is an illustrative user input. This sheet does not quote a market rate. Points and the extension fee use the full commitment, which is the purchase loan plus the rehab holdback. Interest is interest-only for hold months plus extension months. Full-loan interest uses that entire commitment. Drawn-balance interest uses the purchase loan plus the share of the holdback you enter. A share of 50 means half the holdback is treated as outstanding, which is an example for a straight-line draw, not a lender rule. Flip net profit after financing subtracts total financing cost from the profit-before-financing amount you enter.

$
$
$
$
Total points
$4,400.00
Extension fee
$2,200.00
Lender fees
$1,500.00
Interest months
8
ResultDrawn balanceFull loan
Interest$16,000.00$17,600.00
Total financing cost$24,100.00$25,700.00
Cost as % of loan10.95%11.68%
Flip net profit after financing$20,900.00$19,300.00

Worked result

Full-loan financing $25,700.00 (11.68% of the loan). Drawn-balance financing $24,100.00 (10.95% of the loan).

  1. Loan commitment: $180,000.00 + $40,000.00 = $220,000.00
  2. Total points: $220,000.00 x 2 / 100 = $4,400.00
  3. Interest months: 6 hold + 2 extension = 8
  4. Interest on the full loan: $220,000.00 x 12 / 100 x 8 / 12 = $17,600.00
  5. Drawn balance: $180,000.00 + $40,000.00 x 50 / 100 = $200,000.00
  6. Interest on the drawn balance: $200,000.00 x 12 / 100 x 8 / 12 = $16,000.00
  7. Extension fee: $220,000.00 x 1 / 100 = $2,200.00
  8. Lender fees: $1,500.00
  9. Total financing cost, full loan: $4,400.00 + $17,600.00 + $2,200.00 + $1,500.00 = $25,700.00
  10. Total financing cost, drawn balance: $4,400.00 + $16,000.00 + $2,200.00 + $1,500.00 = $24,100.00
  11. Cost as % of loan, full loan: $25,700.00 / $220,000.00 = 11.68%
  12. Cost as % of loan, drawn balance: $24,100.00 / $220,000.00 = 10.95%
  13. Flip net profit after full-loan financing: $45,000.00 - $25,700.00 = $19,300.00
  14. Flip net profit after drawn-balance financing: $45,000.00 - $24,100.00 = $20,900.00

Points, interest, the extension fee, and lender fees are rounded to the cent. Interest months are whole months. The extension fee is a single percent of the full commitment, not a charge per extension month.

Educational mathematical modeling worksheet only; not financial, tax, lending, or legal advice.

The shared workbench below uses the Fix & Flip strategy with this page's example purchase price, rehab budget, 0% down payment, 12% rate, and 6 hold months. Those are example inputs. Its holding cost is an amortizing payment on the purchase price, plus monthly tax and insurance, times hold months. Tax and insurance are set to $0 on this preset so they do not add a second carry figure. The workbench does not price points, a rehab holdback, an extension fee, or interest-only carry on a drawn balance versus the full commitment. Read total financing cost from the sheet above.

Calibration Deals:
DSCR Coverage
0.00x
Below 1.25x
Monthly Cash Flow
-$1,852
-$22,218/yr
Cap Rate
0.00%
NOI $0/yr
70% Flip MAO
$156,000
$24,000 over
Est. Flip Net Profit
+$48,891
ROI 95.7%
1% Rule / GRM
0.00%
GRM 0.0x

Deal Assumptions

$
$
$
$

7x7 Interest Rate vs Vacancy Stress Matrix

0/49 cells pass DSCR >= 1.25x

Click any scenario cell to inspect exact monthly cash flow and lender coverage. Emerald cells clear both positive cash flow and your DSCR bar.

Rate \ Vac0%3%5%8%10%15%20%
10.50%
11.00%
11.50%
12.00%
12.50%
13.00%
13.50%

Annual Operating Statement & Debt Service

Gross Scheduled Income
$0
Effective Gross Income
$0
Operating Expenses
-$0
Net Operating Income
$0
Monthly Debt (P&I)
$1,851.50
Total Cash Required
$40,000

Educational mathematical modeling worksheet only; not financial, tax, lending, or legal advice.

Reference Scenario Benchmarks

Scenario Inputs Result Underwriting Note
Example inputs, half the holdback outstanding Purchase loan $180,000; holdback $40,000; points 2%; rate 12%; hold 6 mo; extension 1% and 2 mo; fees $1,500; share 50%; profit before $45,000 Full $25,700.00; drawn $24,100.00 Illustrative user inputs. Commitment = 180000 + 40000 = $220,000. Points = 220000 x 0.02 = $4,400. Extension fee = 220000 x 0.01 = $2,200. Interest months = 6 + 2 = 8. Full interest = 220000 x 0.12 x 8 / 12 = $17,600. Drawn balance = 180000 + 40000 x 0.50 = $200,000. Drawn interest = 200000 x 0.12 x 8 / 12 = $16,000. Full total = 4400 + 17600 + 2200 + 1500 = $25,700. Drawn total = 4400 + 16000 + 2200 + 1500 = $24,100. Cost = 25700 / 220000 = 11.68% and 24100 / 220000 = 10.95%. Profit after = 45000 - 25700 = $19,300 and 45000 - 24100 = $20,900.
Same inputs, hold months 9 Hold 9 mo; extension 2 mo; other example inputs unchanged Full $32,300.00; drawn $30,100.00 Illustrative user inputs. Interest months = 9 + 2 = 11. Full interest = 220000 x 0.12 x 11 / 12 = $24,200. Drawn interest = 200000 x 0.12 x 11 / 12 = $22,000. Full total = 4400 + 24200 + 2200 + 1500 = $32,300. Drawn total = 4400 + 22000 + 2200 + 1500 = $30,100. Cost = 32300 / 220000 = 14.68% and 30100 / 220000 = 13.68%. Profit after = 45000 - 32300 = $12,700 and 45000 - 30100 = $14,900.
Same inputs, 100% of the holdback outstanding Average share 100%; hold 6 mo; other example inputs unchanged Full $25,700.00; drawn $25,700.00 Illustrative user inputs. Drawn balance = 180000 + 40000 x 1.00 = $220,000, the same as the full commitment. Drawn interest = $17,600. Both totals = $25,700, both costs = 11.68% of the loan, and both profits after financing = $19,300.

Field Verification Checklist

  • 1 Type the purchase loan, the rehab holdback, the points percent, the annual interest-only rate, the hold months, the extension fee percent, the extension months, and the flat lender fees. Each starts as an example input.
  • 2 Compare the two interest lines. Drawn-balance interest uses the average share of the holdback you enter. Full-loan interest uses the entire commitment for the same months. The share is not a lender rule.
  • 3 Subtract total financing cost from your flip net profit before financing. The workbench holding cost is a separate amortizing payment and does not include points, holdback interest, or the extension fee.

Related Underwriting Guides